Timco - Welded Masonry Joist Hangers - A2 Stainless Steel (Size 47 x 200 - 1 Each)

The TIMCO Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.<p></p><ul><li>Conforms to Eurocode 6 and service class 3</li><li>Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber"<p></p><ul><li>Width mm - 47</li><li>Height mm - 190</li><li>Bearing mm - 80</li><li>Thickness mm - 2.4</li><li>Type - Welded</li><li>Material - Austenitic Stainless Steel (A2-304)</li><li>Finish - N/A</li></ul><p></p></li></ul><p></p>

• Width mm - 47
• Height mm - 190
• Bearing mm - 80