High Lift Jack Mounting Brackets Compatible with 207-2018 Jeep Wrangler JK Adjustable Aluminum Hi Lift Jack Mount Accessories 1 Pair Grey OEM 11586.04

Manufacturer:AUROLYNNE Product Name: Jack Mounting Brackets Condition: brand new Manufacturer Warranty: 1 Year OEM: 11586.04 Compatible Modle: 2007 Wrangler JK 2008 Wrangler JK 2009 Wrangler JK 2010 Wrangler JK 2011 Wrangler JK 2012 Wrangler JK 2013 Wrangler JK 2014 Wrangler JK 2015 Wrangler JK 2016 Wrangler JK 2017 Wrangler JK 2018 Wrangler JK Key Features: Install your jack using a multi-functional no-drill bracket The adjustable design is key to their versatility. Whether you want to carry your jack horizontally on a roof rack, vertically on a tube bumper, or in another configuration, these brackets can be adapted to fit. The complete hardware kit and protective gaskets are included for a straightforward installation that aims to protect your vehicle's finish. Protective Installation: Rubber gaskets help cushion the contact points between the metal bracket and your car's paint or powder coat, aiming to minimize wear and noise Maximum Mounting Flexibility: The elongated slots and pivot points allow you to position the jack clamps exactly where needed to match your aftermarket bumpers, cages, or racks. Package Includes: 2 x Aluminum Mounting Brackets (Grey) 2 x Rubber Protective Gaskets 6 x Washers 4 x Mounting Screws Warmly note: Please check the OE number, model and year to confirm whether the parts are suitable for your car. Here Are The General Steps For Installing The Jack Mounting Bracket: 1. Preparation: Make sure the vehicle is in a safe state, parked on a flat, solid surface, and pull the handbrake and activate the parking brake to prevent the vehicle from moving. You can use tools such as wheel chocks to fix the wheels to further ensure safety. Prepare the required tools, such as wrenches, screwdrivers, etc., as well as the jack mounting bracket. 2. Find the support point of the vehicle: Refer to the vehicle's manual to determine the correct support point location at the bottom of the vehicle. These support points are usually designed and reinforced to withstand the weight of the vehicle. The support point may be located on a specific part of the frame or a reinforced structure of the chassis. 3. Install the jack mounting bracket: Place the jack mounting bracket on the determined support point, ensuring that the bracket fits tightly against the support point. Depending on the design and fixing method of the bracket, use the corresponding tools (such as bolts, nuts or clips) to fix the bracket to the vehicle. Make sure it is firmly fixed and will not loosen or move when using the jack. 4. Check whether the installation is firm: Before using the jack, gently shake the jack mounting bracket to check whether it is firmly installed and there is no sign of shaking or looseness. Confirm again that the bracket is tightly connected to the vehicle support point to ensure that it can provide stable support when jacking the vehicle. 5. Install the jack: Place the jack in the designated position on the mounting bracket, ensuring that the bottom of the jack is in stable contact with the bracket. According to the type and operation method of the jack, perform the corresponding operation to gradually raise the jack and jack up the vehicle to the required height. 6. Perform vehicle repair or maintenance operations: After the vehicle is lifted and stabilized by the jack, you can change tires, check chassis components or perform other related repair and maintenance work. 7. Lower the vehicle: When the repair or maintenance operation is completed, follow the operating instructions of the jack and slowly lower the jack to gradually return the vehicle to the ground. After the vehicle is completely lowered, remove the jack mounting bracket and keep it properly. If you have any questions or uncertainties about the installation process, it is recommended to consult a professional automotive repairman. In addition, when performing any vehicle repair or maintenance operations, pay attention to safety and follow the correct operating procedures and precautions.

• OEM: 11586.04
• Compatible Modle: 2007-2018 Wrangler JK
• Complete Mounting Kit: This set includes two adjustable aluminum brackets, two rubber gaskets, and all necessary screws and washers. Provides a complete solution for securely mounting a High-Lift (Hi-Lift) jack to your Wrangler JK
• Durable Aluminum Construction: Made from lightweight yet strong aluminum with a grey finish. Includes protective rubber gaskets to help prevent scratches and reduce vibration between the brackets and your vehicle's body or accessories
• Product Benefits: Made of high quality materials that are easy to install. It's Adjustable and designed to allow secure mounting for High-Lift jacks to tube bumpers, bull bars, roll cages or roof racks. No drilling, the Jack Bracket mounts to existing hood, Front & Rear door hinge holes
• Easy to use: Makes the installation and removal of the jack more convenient, and the operator can install the jack to the appropriate position more quickly and accurately, saving time and energy, and improving the efficiency of changing tires or performing vehicle maintenance
• Service: We provide you with complete after-sales and pre-sales service, any questions and needs please contact us in time, we will reply you within 24 hours and give you the most sincere advice